 |
Rp 6.600.000 | ||
| ･ Material: SCM435 (chrome-molybdenum steel) ･ Surface finish: ZAC-2 (gray)/quenching ･ Hardness: greater than HRC48 ･ Tempering hardness: HRC26 to 34 |
|||
| |||
| Because the serration of these bolts was designed after standard Nissan parts, be careful not to enlarge the holes when the hub bolts are pulled out or the hub may no longer be conform. After referring to the service manual, always use a ball joint remover to pull the bolts straight out from the hub. Pulling out a bolt that is inclined to the left or right can make the holes larger. Also, do not replace head bolts more than once. When a cap nut is used as a wheel nut, if the length between the stopper and the chuck is too long the wheel nut cannot be completely tightened. This is very dangerous. Always attach the wheel nut only after carefully confirming its correct dimensions. | |||
| img | |||
